HOME > Products Information > Floating Dryers
Floating Dryers
Floating dryer is necessary and indispensable in all coating machines.
As for our floating technology, "drying while floating the web fully by the hot wind" is a characteristic.
In to use a best nozzle with the web to dry, the high reliability floating can be done.
Floating Dryers
CA Type Floating Dryer for clean room
Heat source internal type (CA type)
It is the dryer of the energy saving type with in a hot wind circulation fan, a heater, and HEPA filter.
It corresponds to the specification of narrow space and clean, too.
AX Type Floating Dryers
Heat source separate type(AX type)
It's The dryer that a main unit and a heat sourcee unit are separated.
It's possible to install in the places which are narrow to install each in the separate places and to be able to be joined with the duct.
CB Type Floating Dryers
Heat source mount on the main unit type(CB type)
The CB type mild float dryer installs a heat sourcee unit on the upper part of a main unit. It realizes to save the space to the direction of the width by this.
Various floating nozzles of INOKIN
Wing Float Nozzle
Floating with air blown on one side of the web is possible, so that the nozzle can be used at a web setting zone or in an air floatation conveyance.
High Float Nozzle
The standared nozzle provides excellent results at high temperature drying.
Mild Float Nozzle
This nozzle can float the web at a lower air speed in comparison with the High Float Nozzle, it is most suitable for drying in conditions of high evaporation of solvent as adhesives,etc.
Power Float Nozzle
Developed based on the mild float nozzle concept, this nozzle ensures highly at able transfer of ulyra-thin objects.
Application of the various nozzle
| Wing Float Nozzle | High Float Nozzle |
 |
 |
| Mild Float Nozzle and Power Float Nozzle | |
 |
|
